YOKOGAWA Centum VP - Differentiation between BUS 1 and BUS 2 (WAN 1 and WAN 2); Destination Display; Cable Fixing; Handling of Vnet;Ip Cables Connected to the Processor Module

3. Cabling
3-116
TI 33J01J10-01EN
lDi󰀨erentiationbetweenBUS1andBUS2(WAN1andWAN2)
󰀨󰀨
lDestination Display
Attach a display tag at the tip of cables to indicate the station number, switch number, and port
number of the destination.
lCable Fixing

lHandling of Vnet/IP Cables Connected to the Processor Module (CP461 or
CP471)
• Turn the power on after connecting the cables to the CP41.
 
• Before installing the CP41 on-line, connect a cable to it.
lHandling of Cables Connected to the AVR10D/AW810D
• The power supply should not be turned on unless the cables are connected.
 
connected cables.
 
lHandling of Cables Connected to the VI702
• The power of the PC should not be turned on until the cables are connected.
 󰀨
Oct. 5, 2018-00