YOKOGAWA Centum VP User Manual

3. Cabling
3-89
TI 33J01J10-01EN
IMPORTANT

n A2SDV506 Relay output adaptor
󰀨
whether the contact output is NC or NO.

F030715.ai
A
B
C
D
‒
+
A
B
C
D
‒
+
When using contact set to NO When using contact set to NC
: Load
: 1 to 16
Figure When using the relay output adaptor
IMPORTANT

n A2SMX801 Pass-through I/O signal adaptor


F030716.ai
: Field device
A
B
C
D
A
B
C
D
‒
+
‒
+
For DO sink For other than DO sink
: 1 to 16
Figure When using the pass-through I/O signal adaptor
Oct. 5, 2018-00

YOKOGAWA Centum VP Specifications

General

System Type	Distributed Control System (DCS)
Architecture	Client-Server
Control Network	Vnet/IP
Controller Type	FCS (Field Control Station)
Programming Languages	Function Block Diagram (FBD), Sequential Function Chart (SFC), Ladder Diagram (LD), Structured Text (ST)
Operating System	Real-time OS (for Controllers)
Redundancy	Controller, Communication Network, Power Supply
I/O Modules	Analog I/O, Digital I/O
Communication Protocols	Modbus, OPC, Foundation Fieldbus, Profibus, HART
Scalability	From small to large applications
Security	User Authentication, Authorization, Audit Trail
Integration Capabilities	OPC UA, Modbus, Ethernet/IP