YOKOGAWA Centum VP User Manual

vi
TI 33J01J10-01EN
l Connecting Devices
IMPORTANT


l Power Distribution Board
WARNING
Exchanging the fuses must follow the procedure in the hardware instruction manual for each

• The fuses for exchange must be the Yokogawa designated fuses.
• Exchanging relay must follow the procedure in the hardware instruction manual for each

SEE
ALSO

l Exchanging Relay
CAUTION


l Exchanging Fuse
WARNING
• The fuses for exchange must be the Yokogawa designated fuses.
 󰀨
Apr. 21, 2017-00

YOKOGAWA Centum VP Specifications

General

System Type	Distributed Control System (DCS)
Architecture	Client-Server
Control Network	Vnet/IP
Controller Type	FCS (Field Control Station)
Programming Languages	Function Block Diagram (FBD), Sequential Function Chart (SFC), Ladder Diagram (LD), Structured Text (ST)
Operating System	Real-time OS (for Controllers)
Redundancy	Controller, Communication Network, Power Supply
I/O Modules	Analog I/O, Digital I/O
Communication Protocols	Modbus, OPC, Foundation Fieldbus, Profibus, HART
Scalability	From small to large applications
Security	User Authentication, Authorization, Audit Trail
Integration Capabilities	OPC UA, Modbus, Ethernet/IP