1. System Installation Requirements
1-9
TI 33J01J10-01EN
n Applied Standards
The CENTUM VP system complies with the standards shown below.
IMPORTANT
l Safety Standards (*1) (*2) (*3) (*4)
[CSA]
EN 61010-1, EN 61010-2-201, EN 61010-2-030
EN 60825-1
[EAC Marking]
CU TR 004
l EMC Conformity Standards (*3) (*5) (*6)
EN 61000-6-2
EN 61000-3-3
[RCM]
[KC Marking]
Korea Electromagnetic Conformity Standard
[EAC Marking]
CU TR 020
[CSA] CSA C22.2 No.5 or UL 489
[CE Marking] EN 60947-1 and EN 60947-3
[EAC Marking] EN 60947-1 and EN 60947-3
to O (Other).
The length of the cable to feed the external power supply for AGS813 AO channels should not exceed 30 meters.
plates for barrier A2BN4D and A2BN5D, power must not be supplied directly from a DC distribution network.
this harmonic current emission standard. See Section 1.3 “Power Supply System”.
or temperature input mounted, the accuracy under the electromagnetic immunity conditions (acceptance criteria A) is within ±1 % of the
span.
Mar. 29, 2019-00
To Next Page
Loading...
