1. System Installation Requirements
1-11
TI 33J01J10-01EN
n InstallationEnvironmentSpecications
SEE
ALSO
Table EquipmentInstallationSpecications(1/2)
Item
Specications(except
for ANB10, ANB11,
and ANT10U)
Specications
(ANB10, ANB11
and ANT10U)
Specications
(N-IO node)
(*1)
Remarks
Temperature
Normal operation
0 to 50 °C
0 to 60 °C
(Temperature option: –20
0 to 60 °C
(Temperature option: –40
sunlight.
storage
–20 to 60 °C
–20 to 60 °C
(Temperature option: –40
–20 to 60 °C
(Temperature option: –40
sunlight.
Humidity
Normal operation
10 to 90 %RH
%RH)
5 to 95 %RH 5 to 95 %RH No condensation
storage
10 to 90 %RH
%RH)
5 to 95 %RH 5 to 95 %RH No condensation
Temperature
uctuation
Normal operation
–
storage
–
Power
source
Voltage range
100-120 V AC ±10 %
220-240 V AC ±10 %
24 V DC ±10 %
(including ripple)
100-120 V AC ±10 %
220-240 V AC ±10 %
24 V DC ±10 %
(including ripple)
100-120 V AC -15 %
+10%
220-240 V AC -15 %
+10%
–
–
Distortion factor
10 % or less 10 % or less 10 % or less –
125 V or larger
(for 100-120 V AC)
274 V or larger
(for 220-240 V AC)
125 V or larger
(for 100-120 V AC)
274 V or larger
(for 220-240 V AC)
118 V or larger
(for 100-120 V AC)
258 V or larger
(for 220-240 V AC)
–
Momentary
failure
20 ms or less
AC)
20 ms or less
AC)
20 ms or less
AC)
supplied
1500 V AC for 1 minute
AC)
500 V AC for 1 minuite
(for 24 V DC)
1500 V AC for 1 minute
AC)
500 V AC for 1 minuite
(for 24 V DC)
1500 V AC for 1 minute
AC)
42 V DC cobtubyiys
500 V AC for 1 minuite
(for 24 V DC)
Between power
and grounding
terminals
Oct. 5, 2018-00
0, ALR121-
1, ALE111-0, ALE111-
to be incorporated.
9), the
support option for the power supply units and N-ESB bus modules as well.
To Next Page
Loading...
