2. Transportation, Storage and Installation
2-23
TI 33J01J10-01EN
l Providing Space for Heat Dissipation
• Separate the top of the instrumentation board at least 100 mm away from the ceiling, and
2
other base plates.
l Providing Area for Servicing
performed from the front.
performed from the front.
l Compatible DIN Rail
Table Compatible DIN Rail Symbols (DIN 60715, JIS C 2812, IEC 60715, EN50022)
Cross section shapeType symbol Material (chemical symbol)
TH 35-7.5
l Installation of DIN Rail
• Be sure to bring a DIN rail into contact with a mounting plate in order that the heat generated
l Grounding
Be sure to ground the equipment using the functional grounding terminal of the base plate.
mechanism, the equipment must be grounded using the functional grounding terminal.
l Installation Orientation for base plate, node interface unit, and power unit
Oct. 5, 2018-00
To Next Page
Loading...
