2. Transportation, Storage and Installation
2-7
TI 33J01J10-01EN
2.2 Unpacking
In unpacking the received cargoes and equipment, inspect them according to inspection
list below. It is recommended to unpack by Yokogawa engineers or in their presence.
Table Inspection List
Inspection Items Result Measures Required
Exterior
(temperature, humidity, dust)
Suitable Unsuitable If unsuitable, select proper location according to
No Yes If yes, do not unpack and wait until the
• Damage to equipment exterior
No Yes
If damaged badly, inform Yokogawa.
• Condensation or its trace on
No Yes If yes, inform Yokogawa.
Interior
• Loose parts inside equipment.
No Yes
• Damage to equipment interior.
No Yes
If damaged badly, inform Yokogawa.
• Condensation or its trace on
No Yes If yes, inform Yokogawa.
• Dew patterns on PCBs.
• Label characters on PCBs are smudged.
• Connectors on PCBs are smudged.
• Dew patterns or traces of droplets are found on cabinet panels.
CAUTION
Condensation may cause a fatal system failure in the CENTUM VP system. Be sure to unpack
condensation.
CAUTION
Be careful not to let the products fall when you handle them.
exterior.
If you accidentally drop an product, stop using it immediately and report it to Yokogawa.
Jan. 21, 2019-00
To Next Page
Loading...
