YOKOGAWA Daqstation DX1000N Series User Manual

23
IM 04L41B01-02E
6 . Press the CF card eject button. When you eject the CF card, the storage media
icon disappears.
Eject button
Press the eject button in until it clicks.
The eject button stops at depressed position.
Pinch the left and right sides of the CF card
and remove it.
7 . Close the operation cover.
Operation complete.
<Operation in the Basic Setting Mode>
1 . Press MENU (switch to the setting mode), hold down FUNC for 3 s (switch to
the basic setting mode), select Load settings, Initialize > Media eject > CF,
and press DISP/ENTER.
Select CF
The message “Media can be removed safely” appears.
2 . Open the operation cover.
3 . Press the CF card eject button. Remove the CF card.
4 . Close the operation cover.
Operation complete.
Note
If you remove the CF card without carrying out the media eject procedure, the message “Media
was removed compulsorily” appears. Remove the CF card by carrying out the procedure above
to prevent damaging the data that is stored.
Basic Operation

YOKOGAWA Daqstation DX1000N Series Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX1000N Series
Category	Voice Recorder
Language	English