YOKOGAWA Daqstation DX2030

4-18
IM 04L42B01-01E
• Youcanconfigurethecalendar so that weeks start with Sunday or Monday.
Procedure
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > TimeSettings > Calendardisplay
> 1stweekday.
You can set the first weekday (the day that appears on the far left side of the
calendar) to SUN (Sunday) or MON (Monday).
• Signature(OnlyonDXswiththe/AS1advancedsecurityoption)
See the Advanced Security Function (/AS1) User’s Manual, IM 04L41B01-05EN.
4.3DisplayingPastMeasuredData(HistoricalTrendDisplay)