YOKOGAWA Daqstation DX2030

10-1
IM 04L42B01-01E
Using External Input Channels (/MC1 Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
10.1 SettingExternalInputChannels
External input channels can be used on the DX2010, DX2020, DX2030, DX2040, and
DX2048. The data of other devices loaded using the communication function can be
displayed on the DX and saved.
SetupScreen
• SettingtheInput
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the Menu tab > Communication(Ethernet) or
Communication(Serial) > Modbus client or Modbus master > Command
settings.
• InputRangeandAlarm
Press MENU (to switch to setting mode), and select the Menu tab > Ext.channel >
Range,Alarm.
Chapter10 UsingExternalInputChannels(/MC1Option)