YOKOGAWA Daqstation DX2048 - Page 152

4-20
IM 04L42B01-01E
● FINEGRID
With FINE GRID OFF With FINE GRID ON
Fine grid
• TAGDETAIL
When TAG DETAIL is set to ON and a tag does not fit into the typical tag display
space, it covers the alarm and measured values so that it can be displayed completely.
If the tag comment and number do not fit within a display area, they can be scrolled.
The TAG DETAIL setting made in one display affects the settings in all of the other
displays.
The figure below shows an example for when six channels are being displayed.
 WhentheTagNumberIsNotDisplayed
If TAG DETAIL is on, the tag comment is displayed as much as possible.
With TAG DETAIL OFF With TAG DETAIL ON
Tag comment
Tag comment
 WhentheTagNumberIsDisplayed
When TAG DETAIL is set to off, display priority is given to the tag number. If TAG
DETAIL is on, the tag number and comment are displayed as much as possible.
With TAG DETAIL OFF With TAG DETAIL ON
Tag no.
Tag comment
Tag no.
Tag comment
4.3DisplayingPastMeasuredData(HistoricalTrendDisplay)