YOKOGAWA SC4A - 4 Model Sx42; General Specifications; Measuring Elements; Materials

IM 12D07J01-10E-E
26
4. MODEL SX42
4.1. General Specifications
4.1.1. Measuring elements
2-electrode measuring system
Pt1000 temperature sensor
4.1.2. Materials
Wetted parts sensor:
Body : Stainless Steel AISI 316L
Electrodes : Stainless Steel AISI 316L
Insulation : Ceramic (aluminium oxide)
Connector:
Amphenol: Contacts : gold plated
Plug : Polyamide
Variopin: Contacts : gold plated
Material : Nickel-plated brass
Insulation : PEEK, UL94-V0
IP class : IP67
Terminal box flanged models:
Housing : Aluminium
Insulation : Ceramic
4.1.3. Functional specifications (at 25°C)
Temperature element : Pt1000 to IEC 751
Nominal Cell Constant (C.C.) SX42-SX24 : 0.1 cm
-1
SX42-SX34 : 0.01 cm
-1
Note: The SX42 temperature sensor is designed for cell compensation and for indication.
It is NOT designed for process temperature control.
4.1.4. Operating range
Conductivity at actual process temperature : 1 μS * C.C. – 200 mS * C.C.
See Fig. 2: Measuring range of conductivity
sensors section 2.1.5
Temperature Threaded models (-BS,-NS) : 0°C to 200°C (32°F to 392°F)
Threaded models (-BV,-NV) : 0°C to 125°C (32°F to 257°F)
Flanged models : 0°C to 250°C (32°F to 482°F)
Pressure Threaded models : 0 to 40 bar (0 to 363 PSIG)
Flanged model PN63 : 0 to 40 bar (0 to 580 PSIG)
Flanged model PN40 : 0 to 30 bar (0 to 435 PSIG)