Need help?Do you have a question about the Yongnuo RF605 and is the answer not in the manual?
General| Type | Wireless Flash Trigger |
|---|---|
| Channels | 16 |
| Range | Up to 100m |
| Power Supply | 2 x AA batteries |
| Remote Shutter | Yes |
| Flash Modes | Manual, Multi |
| Power Output | 1/1 to 1/128 |
| Wireless Trigger | Yes |
| Compatibility | Canon, Nikon, Sony, Pentax, Olympus |
| Interface | Hot Shoe |
| Recycling Time | 0.1-5s |
| Battery Type | AA |
Installation of batteries into the transceiver.
Mounting the transmitter onto the camera's hot shoe.
Mounting the receiver and flash onto their respective positions.
Configuring communication mode and transmit/receive status.
Setting channel and group configurations for all transceivers.
Using wireless shutter release in RF-602 mode.
Using wired/wireless shutter release in RF-603 mode.
Using PC interface to trigger different flash units.
Remote shooting and synchronizing flash triggers wirelessly.
Resolving problems with powering on, testing, or triggering the flash.
Addressing issues where the flash fails to wake up.
Troubleshooting failures in releasing the camera shutter.
Resolving problems related to controlling flash groups.
To Next Page
