YOODA UNO Series - User Manual

Need help?

Do you have a question about the YOODA UNO Series and is the answer not in the manual?

Summary

General Information

Product Overview

Details the 1-channel UNO remote control, white (UNO_1R), its compatibility, and general purpose.

Technical Specifications

Lists key technical data: control type, range, battery, power supply, dimensions, transmitting power, operating temperature, and protection degree.

Range Variability Factors

Explains how environmental conditions like construction and interference affect radio receiver range.

Detailed Description

Transmitter Components

Identifies and describes the front and back components of the 1-channel transmitter, including buttons and battery.

Battery Lifespan and Replacement

Provides guidance on estimated battery lifespan, conditions for battery replacement, and transmitter operation.

Battery Disposal Warning

Warns about hazardous substances in batteries and the need for proper disposal to protect health and the environment.

Programming the Transmitter

Programming Procedure

Step-by-step guide on how to program the transmitter using the programming button and ON/OFF button.

Summary

General Information

Product Overview

Details the 1-channel UNO remote control, white (UNO_1R), its compatibility, and general purpose.

Technical Specifications

Lists key technical data: control type, range, battery, power supply, dimensions, transmitting power, operating temperature, and protection degree.

Range Variability Factors

Explains how environmental conditions like construction and interference affect radio receiver range.

Detailed Description

Transmitter Components

Identifies and describes the front and back components of the 1-channel transmitter, including buttons and battery.

Battery Lifespan and Replacement

Provides guidance on estimated battery lifespan, conditions for battery replacement, and transmitter operation.

Battery Disposal Warning

Warns about hazardous substances in batteries and the need for proper disposal to protect health and the environment.

Programming the Transmitter

Programming Procedure

Step-by-step guide on how to program the transmitter using the programming button and ON/OFF button.

Overview

YOODA UNO_1R Remote Control

YOODA UNO_1R Remote Control

The YOODA UNO_1R is a 1-channel remote control designed for use with YOODA brand devices, specifically for controlling on/off functions. This white remote control, identified as UNO_1R, is part of the UNO series and offers a straightforward interface for managing your compatible devices.

Function Description

The primary function of the UNO_1R remote control is to provide a simple on/off control for connected devices. It features a single button that sequentially sends ON and OFF signals, making it intuitive to operate. This allows users to easily switch their devices on or off with a single press.

Important Technical Specifications

Control:

Ability to control the on/off device.

Range:

Outdoor: 200 meters
Indoor: 35 meters
Note: Radio receiver range is a variable value and can differ from declared values depending on conditions in which the device operates. Possible sources of changes in range include building construction, interference caused by other radio transmitters, etc.

Battery:

Type: 1 x CR2430
Power Supply: 3 V
Estimated Battery Lifespan: 3 years (if the device runs 4 commands a day on average).

Dimensions:

50 x 31 x 17 mm

Transmitting Power:

10 mW

Operating Temperature:

0°C to +50°C

Protection Degree:

IP 30

Compatibility:

UNO transmitters are compatible with all YOODA brand devices.

Usage Features

Simple Operation: The UNO_1R features a single ON/OFF button on its front. This button is used for both turning devices on and off, sending sequential signals with each press.

Programming: To program the transmitter for use with a remote-controlled socket:

Turn on the power to the remote-controlled socket.
Locate the programming button (P2) on the back of the UNO_1R transmitter.
Press and hold the programming button for approximately 3 seconds until the LED diode on the receiver signals that it has entered programming mode.
Once the receiver is in programming mode, press the ON/OFF button on the UNO_1R transmitter once.
An "OK" signal will indicate that the transmitter has been successfully saved in the device memory.

Important Note: The programming button should not be pressed using sharp tools to avoid damage.

Maintenance Features

Battery Replacement:

Batteries should be changed when the LED diode stops flashing during channel changes or when the receiving device stops reacting to commands.
The battery compartment is located on the back of the transmitter.

Battery Disposal:

Batteries contain substances that may be hazardous to health and may pollute the environment. Used batteries should be disposed of properly according to local regulations.

General Care:

To ensure optimal performance and longevity, it is recommended to handle the device with care and avoid exposing it to extreme conditions outside its specified operating temperature and protection degree.
Regularly check the range performance, especially if environmental factors such as new construction or other radio transmitters are introduced, as these can affect the effective range.