York AC030X1222 User Manual (English)

To Next Page

SPLIT-SYSTEM

AIR CONDITIONERS

12 SEER

MODELS:

AC018X12* THRU 060

(1.5 THRU 5 NOMINAL TONS, 1 PH)

Due to continuous product improvement, specifications

are subject to change without notice.

Visit us on the web at www.york.com for the most

up-to-date technical information.

Additional rating information can be found at

www.ariprimenet.org.

LISTED

CERTIFICATION APPLIES ONLY

WHEN THE COMPLETE

SYSTEM IS LISTED

WITH ARI.

ISO 9001

Certified Quality

Management System

036-21106-005 Rev. B (0505)

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

TECHNICAL

GUIDE

TECHNICAL

GUIDE

DESCRIPTION

The 12 SEER Series condensing unit is the outdoor

part of a versatile system of air conditioning. It is

designed to be custom-matched with one of UPG’s

complete line of evaporator sections, each designed to

serve a specific function. Matching Air Handlers are

available for upflow, downflow or horizontal applica-

tions to provide a complete system. Electric Heaters

are available if required. Add-On coils are available for

use with upflow, downflow or horizontal furnaces and

air handlers.

WARRANTY

5-year limited parts warranty.

10-year limited compressor warranty.

FEATURES

• QUALITY CONDENSER COILS - The coil is constructed

of enhanced copper tube and aluminum fins.

• COIL PROTECTION - Coils are protected from damage by

a polymer mesh applied between the coil face, and a PVC

coated steel coil guard.

• PROTECTED COMPRESSOR - The compressor is inter-

nally protected against high pressure and temperature.

This is accomplished by the simultaneous operation of

high pressure relief valve and a temperature sensor which

protects the compressor if undesirable operating condi-

tions occur. A liquid line filter-drier further protects the

compressor.

• DURABLE FINISH - The cabinet is made of pre-painted

steel. The pre-treated galvanized steel provides a better

paint to steel bond, which resists corrosion and rust creep.

Special primer formulas and matted textured champagne

finish insure less fading when exposed to sunlight.

• LOWER INSTALLED COST - Installation time and costs

are reduced by easy power and control wiring connec-

tions. Discharge line heat exchanger knockouts are pro-

vided, if required. Available in sweat connect models only.

The unit contains enough refrigerant for matching indoor

coils and 15 feet of interconnecting piping. The small base

dimension means less space is required on the ground or

roof.

• TOP DISCHARGE - The warm air from the top mounted

fan is blown up away from the structure and any landscap-

ing. This allows compact location on multi-unit applica-

tions.

• LOW OPERATING SOUND LEVEL - The upward air flow

carries the normal operating noise up away from the living

area. The rigid top panel effectively isolates any motor

sound. Isolator mounted compressor and the rippled fins

of the condenser coil muffle the normal fan motor and

compressor operating sounds.

• LOW MAINTENANCE - Long life permanently lubricated

motor-bearings need no annual servicing.

• EASY SERVICE ACCESS - Fully exposed refrigerant con-

nections, a single panel covering the electrical controls

and the molex plug in the control box connecting the con-

denser fan, make for easy servicing of the unit.

• SECURED SERVICE VALVES - Secured re-usable ser-

vice valves are provided on both the liquid and vapor

sweat connections for ease of evacuating and charging.

• U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment cer-

tification program, which is based on ARI Standard 210/240.

Need help?

Do you have a question about the York AC030X1222 and is the answer not in the manual?

York AC030X1222 Specifications

General

Brand	York
Model	AC030X1222
Category	Air Conditioner
Language	English

Summary

Technical Guide Overview

Product Description

Overview of the 12 SEER Series condensing unit and its system components.

Warranty Information

Details the limited warranty coverage for parts and compressor.

Key Product Features

Highlights key design and performance characteristics of the unit.

Physical and Electrical Data

Unit Specifications

Covers supply voltage, normal voltage range, and electrical ratings.

Component Details

Includes compressor, fan motor, and coil specifications.

Dimensions and Refrigerant Lines

Lists physical dimensions and refrigerant line sizes.

Refrigerant Charge and Orifice Selection

System Matching Data

Provides R-22 charge and orifice size for matched indoor coils.

Charge/Orifice Procedures and Notes

System Charge Procedures

Outlines steps for determining and verifying system refrigerant charge.

Technical Footnotes

Explains key terms and provides important procedural notes.

Cooling Capacity with Air Handlers

Air Handler System Performance

Lists SEER and EER for AC units paired with air handlers.

Capacity Ratings

Details total and sensible cooling capacity for air handler systems.

Cooling Capacity with Furnaces

Furnace System Matching

Shows cooling capacity for AC units paired with furnaces.

Furnace Performance Ratings

Lists net MBH, SEER, and EER for furnace systems.

Extended Cooling Capacity Data

Additional Furnace/Coil Performance

Continues cooling capacity tables for furnace matches.

Performance Adjustment Notes

Explains how to adjust capacity based on temperature.

Cooling Performance and Accessories

Performance at Condensing Temperatures

Presents cooling data at various condensing temperatures.

Optional Accessories and Sound

Lists available accessories and sound power ratings.

Installation and Wiring

Outdoor Unit Installation Clearances

Specifies minimum clearances for installation.

Field Wiring Diagram

Illustrates typical single-phase electrical wiring connections.