$SSHQGL[
$SSHQGL[
Method of testing the system at a fixed frequency operation.
9K 12K 9K 12K 9K 12K
25 25 50 68 80 95
25 25 53 74 80 95
30
P0 P1 P2
P2
16 18 19
Cooling
Heating
P0 P1
27 29
Model
Mode
Rotate speed
Setting temp.
Mode
Rotate speed
Setting temp.
After set up the turbo and indoor setting temperature, within 2.5s continuously press “Sleep” button four times, the
displayer will display P0 or the corresponding codes, that will enter into relevant testing status, the compressor will
run according to the relevant frequency.
P0: Min. status; P1: Rated status; P2:Max. status
To Next Page
Loading...
