York H1RD036S06 - User Manual

TECHNICAL GUIDE
SPLIT-SYSTEM
AIR CONDITIONERS
13 SEER
MODELS:
H*RD018 THRU 060
(1.5 THRU 5 NOMINAL TONS)
Due to continuous product improvement, specification
s
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ariprimenet.org.
LISTED
U
N
I
T
A
R
Y
H
E
A
T
P
U
M
P
T
E
Q
U
I
P
M
E
N
R
S
E
C
T
I
O
N
S
A
T
I
O
N
E
R
T
I
F
I
C
C
O
F
D
S
T
A
N
D
A
R
I
A
R
2
4
0
M
A
N
U
F
A
C
T
U
R
E
R
C
E
R
T
I
F
I
E
D
C
L
Y
O
M
P
I
N
G
T
O
A
R
I
A
S
CERTIFICATION APPLIES ONLY
WHEN THE COMPLETE
SYSTEM IS LISTED
WITH ARI.
®
036-21339-001 Rev. C (0602)
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 13 SEER Series condensing unit is the outdoor part of a
versatile system of air conditioning. It is designed to be cus-
tom-matched with one of UPG’s complete line of evaporator
sections, with each serving a specific function. Matching Air
Handlers are available for upflow, downflow, or horizontal
applications to provide a complete system. Electric Heaters
are available, if required. Add-On coils are available for use
with upflow, downflow, or horizontal furnaces and air han-
dlers.
WARRANTY
5-year limited parts warranty.
10-year limited compressor warranty.
FEATURES
• QUALITY CONDENSER COILS - The coil is constructed
of copper tube and aluminum fins.
• PROTECTED COMPRESSOR - The compressor is inter-
nally protected against high pressure and temperature.
This is accomplished by the simultaneous operation of
high pressure relief valve and a temperature sensor which
protects the compressor if undesirable operating condi-
tions occur. A liquid line filter-drier further protects the
compressor.
• DURABLE FINISH - The cabinet is made of pre-painted
steel. The pre-treated galvanized steel provides a better
paint to steel bond, which resists corrosion and rust creep.
Special primer formulas and desert sand matted-textured
finish insure less fading when exposed to sunlight.
• LOWER INSTALLED COST - Installation time and costs
are reduced by easy power and control wiring connec-
tions. Discharge line heat exchanger knockouts are pro-
vided, if required. Available in sweat connect models only.
The unit contains enough refrigerant for matching indoor
coils and 15 feet of interconnecting piping. The small base
dimension means less space is required on the ground or
roof.
• TOP DISCHARGE - The warm air from the top mounted
fan is blown up away from the structure and any landscap-
ing. This allows compact location on multi-unit applica-
tions.
• LOW OPERATING SOUND LEVEL - The upward air flow
carries the normal operating noise away from the living
area. The rigid top panel effectively isolates any motor
sound. Isolator mounted compressor and the rippled fins
of the condenser coil muffle the normal fan motor and
compressor operating sounds.
• LOW MAINTENANCE - Long life permanently lubricated
motor-bearings need no annual servicing.
• EASY SERVICE ACCESS - Fully exposed refrigerant con-
nections, a single panel covering the electrical controls,
and the molex plug in the control box connecting the con-
denser fan make for easy servicing of the unit.
• SECURED SERVICE VALVES - Secured re-usable ser-
vice valves are provided on both the liquid and vapor
sweat connections for ease of evacuating and charging.
• U.L. and C.U.L. listed - approved for outdoor application.
Certified in accordance with the Unitary Small Equipment cer-
tification program, which is based on ARI Standard 210/240.

Summary

Product Description and Features

General Description

Overview of the 13 SEER Series condensing unit and its system compatibility.

Warranty Details

Details the warranty coverage for parts and the compressor.

Key Product Features

Highlights attributes like quality coils, protected compressor, durable finish, and ease of use.

Physical and Electrical Data

Unit Specifications

Provides detailed physical and electrical data for each model, including voltage, ampacity, and motor ratings.

Dimensional Information

Presents unit dimensions and refrigerant connection line sizes for various models.

Cooling Capacity - Split System

13 SEER AC with N-AH; G2 FD

Lists cooling capacities for 13 SEER AC units matched with N-AH / G2FD air handlers.

13 SEER AC; N1 VS - Variable Speed

Presents cooling capacities for 13 SEER AC units with N1VS variable speed air handlers.

13 SEER AC; F2 RP; RC; FP; FC; FV

Details cooling capacities for 13 SEER AC units matched with F2RP/RC/FP/FC/FV fan coil units.

Cooling Capacity - Furnace and Coil Combinations

Upflow, Downflow & Horizontal Furnaces

Provides cooling capacities for units paired with upflow, downflow, and horizontal furnaces.

Cooling Capacity - Variable Speed Furnaces

1 PH 13 SEER AC; P1 DU; P1 XD; P1 XU

Lists cooling capacities for 13 SEER AC units with variable speed furnaces.

Cooling Performance Data

Performance Metrics by Model and Conditions

Presents detailed cooling performance data (T.C., S.C., KW) across various temperatures and indoor coil matches.

Installation, Accessories, and Sound

Available Accessories

Lists optional accessories such as hard start kits and compressor blankets.

Sound Ratings

Provides sound ratings in decibels for units with and without sound blankets.

Installation and Wiring

Covers typical installation clearances and field wiring requirements for single-phase applications.

Matching Indoor Components

Add-On Coils for Furnaces

Illustrates add-on coils designed for furnace applications.

Air Handlers for Non-Furnace Use

Shows air handler units suitable for non-furnace applications.

York H1RD036S06 Specifications

General

Tonnage	3 Ton
Refrigerant	R-410A
Cooling Capacity	36000 BTU
Seasonal Energy Efficiency Ratio (SEER)	16 SEER
Power Supply	208/230V, 1 Phase, 60Hz