Need help?Do you have a question about the York R91/BGE and is the answer not in the manual?
General| Brand | York |
|---|---|
| Model | R91/BGE |
| Category | Remote Control |
| Display | LCD |
| Compatibility | York air conditioners |
| Power Source | Battery |
| Functions | Temperature control, mode selection, fan speed, timer |
| Buttons | Power, Mode, Temp Up, Temp Down, Swing, Timer |
Lists AUTO, COOL, DRY, HEAT, and FAN operating modes for the air conditioner.
Describes the 24-hour timer setting capability for the air conditioner's operation.
Specifies the indoor setting temperature range as 17°C to 30°C for the unit.
Mentions the Liquid Crystal Display (LCD) shows all functions of the air conditioner.
Notes the presence of a night light function on the air conditioner.
Explains the MODE button and its sequence (AUTO, COOL, DRY, HEAT, FAN).
Details the FAN SPEED button and its sequence (AUTO, LOW, MED, HIGH).
Covers the SWING and AIR DIRECTION buttons for louver control.
Explains the TIMER ON and TIMER OFF buttons for setting operation times.
Covers LED DISPLAY and RESET buttons for screen control and setting cancellation.
Explains TURBO for powerful operation and SLEEP for energy saving.
Describes the ON/OFF button to start and stop the air conditioner unit.
Details the TEMP buttons for increasing or decreasing the indoor temperature setting.
Explains the LOCK button to prevent accidental changes to current settings.
Indicates when the remote controller is transmitting signals to the indoor unit.
Shows the current operation mode and ON/OFF status on the remote display.
Displays the set temperature or timer settings on the remote control.
Shows the selected fan speed (HIGH, MED, LOW) or AUTO/DRY indication.
Displays when the LOCK function is activated on the remote controller.
Guidance on optimal placement for signal reception and potential time lags.
Important warnings regarding signal blockage, liquid exposure, and sunlight.
Instructions on how to replace batteries in the remote controller.
Steps to initiate AUTO mode, including mode, temperature, and power settings.
How to stop the unit or change mode from AUTO if uncomfortable.
Steps to start COOL, HEAT, or FAN modes, including temperature and fan speed.
How to stop the unit after operating in COOL, HEAT, or FAN modes.
Instructions for starting DRY mode, noting automatic low fan speed.
How to stop the unit when operating in DRY mode.
Explains how DRY mode cycles cooling and fan to manage humidity.
Steps to set the auto-on timer for the air conditioner.
Steps to set the auto-off timer for the air conditioner.
Combined process for setting both auto-on and auto-off timer functions.
Explains timer sequence, time adjustments, and overlap handling.
Instructions on how to modify existing TIMER ON/OFF settings.
Covers battery replacement, long-term storage, and battery life advice.
Warnings on signal barriers, liquid exposure, sunlight, and EMI interference.
To Next Page
