York SUNLINE 2000 DM 048 User Manual

036-21502-003-A-1105
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
SINGLE PACKAGE GAS/ELECTRIC UNITS
AND SINGLE PACKAGE
AIR CONDITIONERS
DM 036, 048, 060 & 072
3, 4, 5 & 6 NOMINAL TONS
10.0 SEER (3, 4 & 5 TONS), 9.0 EER (6 TONS)
®
TECHNICAL GUIDE
DESCRIPTION
YORK Sunline 2000™ units are convertible single package
air conditioners with a common cabinet and a common roof
curb for the 3, 4, 5 and 6 ton sizes. The units were designed
for light commercial and commercial applications. They can
easily be installed on a roof curb, slab, roof jack or frame.
All units include:
• Powder Paint finish that meets ASTM-B-117 1000 hour
salt spray standards
• Permanently lubricated motors
• Bottom or side air discharge configuration capability
(field convertible)
• Manufactured under the quality standards of ISO9001
•
Simplicity
TM
Control Board
• Copper tube/aluminum fin coils
• Easy access to all components
• Rigging holes in base rails for lifting
• Fork lift slots on three sides
• Single point power connection
• Complete factory package - tested, charged and wired
• CSA agency listing on all units
WARRANTY
• Factory Limited Parts Warranty
• One-year parts warranty
• A Five-year parts warranty on the compressor and
electric heat elements.
• Ten-year parts warranty on the gas-fired heat
exchangers.

York SUNLINE 2000 DM 048 Specifications

General

Brand	York
Model	SUNLINE 2000 DM 048
Category	Air Conditioner
Language	English

Summary

Single Package Unit Overview

Product Description and Features

Summarizes key aspects and benefits of the units.

Warranty Coverage Details

Outlines the different warranty periods for unit components.

Product Model Number Nomenclature

Decoding the Model Number

Breaks down the model number into its constituent parts and meanings.

Key Unit Features and Controls

Factory Options and Unit Design

Simplicity™ Control System Features

Details advanced control functions like low ambient and diagnostics.

Factory Installed Options

Economizer and Damper Options

Covers advanced air management systems for ventilation.

Coil and Electric Heater Options

Wiring and Connection Diagrams

Typical Power Wiring Connections

Shows how to connect single and three-phase power supplies.

Control Wiring Configurations

Guide Specifications - General

General Unit Construction and Standards

Covers manufacturing, ISO certification, and base rails.

Product Ratings and Certifications

Unit Control System Details

Control Board Features, Safety, and Diagnostics

Details lockout circuits, safety switches, and fault codes.

Heating, Operation, and Electrical Requirements

Gas and Electric Heating Section Details

Operating Characteristics and Electrical Needs