Need help?Do you have a question about the York YCAL0134 and is the answer not in the manual?
General| Model | YCAL0134 |
|---|---|
| Compressor Type | Scroll |
| Refrigerant | R-410A |
| Phase | 3 |
| Cooling Capacity | 134 Tons |
Details overall unit construction, compressors, cooler, and condenser components.
Details the control center's display, keypad, and operational capabilities.
Details available power connection options like terminal blocks and disconnect switches.
Lists options for ambient kits, BAS interface, and language displays.
Covers options like low temperature brine, code relief valves, and hot gas by-pass.
Discusses condenser coil protection, enclosure panels, and sound attenuation.
Details rules for interpolation, ratings, correction factors, and selection steps.
Specifies minimum and maximum operating temperatures and flow rates for models.
Presents water pressure drop curves in GPM vs. Flow for English units.
Displays water pressure drop curves in L/S vs. Flow for SI units.
Summarizes general unit, condenser, and evaporator data in English units.
Summarizes general unit, condenser, and evaporator data in SI units.
Shows overall unit dimensions, power/control entry, and recommended clearances.
Provides center of gravity data for aluminum and copper coil configurations.
Displays overall unit dimensions, entry points, and installation clearances.
Lists center of gravity for aluminum and copper coil configurations.
Shows unit dimensions, power/control entry, and necessary installation clearances.
Provides center of gravity data for aluminum and copper coil units.
Displays unit dimensions, entry points, and required installation clearances.
Lists center of gravity for aluminum and copper coil units.
Shows unit dimensions, power/control entry, and installation clearances.
Provides center of gravity data for aluminum and copper coil units.
Displays unit dimensions, entry points, and required installation clearances.
Lists center of gravity for aluminum and copper coil units.
Shows unit dimensions, power/control entry, and installation clearances.
Provides center of gravity data for aluminum and copper coil units.
Shows unit dimensions in mm, entry points, and installation clearances.
Provides center of gravity data in mm for aluminum/copper coils.
Displays unit dimensions in mm, entry points, and installation clearances.
Lists center of gravity in mm for aluminum/copper coils.
Shows unit dimensions in mm, power/control entry, and clearances.
Provides center of gravity data in mm for aluminum/copper coils.
Displays unit dimensions in mm, entry points, and installation clearances.
Lists center of gravity in mm for aluminum/copper coils.
Shows unit dimensions in mm, power/control entry, and clearances.
Provides center of gravity data in mm for aluminum/copper coils.
Displays unit dimensions in mm, entry points, and installation clearances.
Lists center of gravity in mm for aluminum/copper coils.
Shows unit dimensions in mm, power/control entry, and clearances.
Provides center of gravity data in mm for aluminum/copper coils.
Details the weight distribution for aluminum fin coils in lbs and kg.
Presents weight distribution for copper fin coils in lbs and kg.
Provides selection data for 1-inch deflection isolators for aluminum fin coils.
Lists seismic isolator selections for aluminum fin coils based on VMC model numbers.
Provides selection data for 1-inch deflection isolators for copper fin coils.
Lists seismic isolator selections for copper fin coils based on VMC model numbers.
Identifies spring isolator models, part numbers, and colors for identification.
Explains Minimum Circuit Ampacity (MCA), disconnects, fuses, and breakers.
Covers single and multiple point power supply connections and wiring ranges.
Illustrates standard power supply wiring for models YCAL 0014-0080.
Details CTB1 terminal functions for flow switch, remote start/stop, and inputs.
Guides on selecting unit location, considering airflow, noise, and clearances.
Specifies requirements for unit foundations on ground and roof installations.
Covers chilled liquid piping, valves, strainers, and flow switch recommendations.
Outlines scope, quality assurance standards, and delivery/handling requirements.
Details chiller materials, components like compressors, evaporators, and condensers.
Describes microprocessor control center functions, setpoints, and data display.
Details various accessories and options that can be added to the chiller.
Covers power panel requirements and single/multiple point supply connections.
To Next Page
