8
Key Functions
Low Medium High Auto
1
2
4
3
5
6. TURBO/QUIET
(1) Press "TURBO/QUIET", the LCD displays
TURBO Mode is set.
Press "TURBO/QUIET" again,the controller LCD
displays
the Quiet Mode is set.
Press"TURBO/QUIET" again to exit the setting of
TURBO/QUIET. Resume set air speed.
(2) This function is only enabled in Cool mode.
7. TIMER
1. Auto Mode:
Press the MODE button when
indicates.
The mode of operation, COOL or FAN, will be
automatically determined by room temperature.
2.Cool Mode:
The air conditioner is designed for cooling
when ambient temperature is 18-43
.
Press the MODE button when
indicates.
Set the desired temperature with the TEMP+/-.
AUTO FAN SPEED is automatically determined
HIGH, MEDIUM or LOW speed according to the
difference between room and pre-set temperature.
3. FAN SPEED Mode:
(1) In modes other than Fan, the air speed can
be adjusted in order: Low, Medium, High and
Auto.
(2) In FAN mode, the "Auto" is disabled.
4.Dry Mode:
Press the MODE button when
indicates.
The Fan speed is pre-set at auto speed.
5. Louver indicator
Timer
On
Timer
Press
,the blinking.
Press
/ to
select the desirable time.
Press
to confirm.
Timer
On
Off
On
Off
Press
,the blinking.
Press
/ to
select the desirable time.
Press
to confirm.
Intelligent TIMER for setting both
ON-OFF times at one time.
Press
, the blinking.
Press
/ to
select the desirable start time.
Press
, the blinking.
Press
/ to
select the desirable stop time.
Press
to confirm.
Timer
Off
EXIT
Press TIMER button again to
cancel timer setting and exit.
To Next Page
Loading...
