EasyManua.ls Logo

York YLCC-122 - Parameters Related to Defrost

York YLCC-122
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
d01 U 7 (R/W) - 1 0 1 1
d02 U 8 (R/W) - 1 0 1 1
d03 Defrost start temperature U 19 (R/W) °C d04 -40 -1 -1
d04 Defrost end temperature U 21 (R/W) °C 80 d03 5 5
d05 Minimum time for defrost start U 37 (R/W) Sec 150 10 60 60
d06 Minimum duration of defrost U 38 (R/W) Sec 150 0 0 0
d07 Maximum duration of defrost U 39 (R/W) Min. 15 1 10 10
d08 Time between two defrost cycles U 40 (R/W) Min. 150 10 30 30
d09
Defrost delay between the two circuits U 41 (R/W) Min. 150 0 10 10
d10 External contact defrost F 42 (R/W) - 3 0 2 0
d11 U 9 (R/W) - 0 1 0 0
d12 Compressor OFF prior to defrost F 43 (R/W) Min. 3 0 0 0
d13 Compressor OFF after defrost F 44 (R/W) Min. 3 0
d16 F 47 (R/W) Sec 360 0 0 0
Parameters related to defrost
Execution of defrost 0 = no; 1 = yes
Defrost based on time or temperature
0 = time (function not available)
1 = temperature
Forced ventilation time at the end of defrost
(only if F13 = 2).
Activation of heaters in defrost
0 = no
1 = yes
Display Description
Value
Pump Cool
VS
Level Unit Max. Min.












Related product manuals