Do you have a question about the York YLCC-122 and is the answer not in the manual?
Identification system for unit components and models.
Key features and advantages of the YLCC/YLCC-H units.
Details on casing, compressor, exchangers, refrigerant, and cooling circuit.
Factory-installed electrical and control components with IP44 protection.
Details on optional accessories like Hydro kit GH.
Technical data and electrical characteristics for cool-only models.
Technical data and electrical characteristics for heat pump models.
Operational parameters for cool-only YLCC units.
Operational parameters for YLCC-H heat pump units.
Cooling capacity and consumption data for YLCC-42.
Heating capacity and consumption data for YLCC-H-42.
Flow/pressure curves for YLCC/YLCC-H 42 and 62.
Fan performance data for YLCC/YLCC-H 42/42V models.
Factors for glycol solutions and freezing point data.
Explanation of safety symbols used on the unit.
Guidelines for safe and proper unit transportation.
Instructions for water intake and outlet connections.
Diagrams for power and remote control connections.
Overview of the multipurpose controller and its capabilities.
Explanation of symbols shown on the display.
Description of keyboard keys and their operations.
Overview of parameters grouped by function.
Table of parameters for compressor operation and timing.
Table of parameters for fan operation and control.
Table of parameters for defrost cycle control.
Table of parameters for antifreeze functionality.
Table of parameters for unit setup and configuration.
Table of parameters for alarm settings and behavior.
Table of parameters for controller setpoints and logic.
List of alarms, their causes, and reset methods.
Procedure for cancelling active alarms.
Dimensional drawings and clearances for YLCC/YLCC-H 42.
First part of the wiring diagram for YLCC-42/62.
Explanation of symbols shown on the display.
Description of keyboard keys and their operations.
List of alarms, their causes, and reset methods.
Resistance values for NTC probes based on temperature.