Do you have a question about the YORKVILLE AP812 and is the answer not in the manual?
Channels | 8 |
---|---|
Inputs | 4 x XLR, 8 x 1/4" TRS, 2 x RCA |
USB | No |
Microphone Inputs | 4 |
Phantom Power | Yes |
EQ | 3-band |
Aux Sends | 1 |
Dimensions | 26 x 27.2 x 6.9 cm |
Weight | 2.5 kg |
Type | Analog |
Power | External power supply |
Warning against opening the unit to avoid electric shock hazard.
Instructions for preventing fire, electric shock, or injury to persons.
Guidance on connecting the unit to the specified power source.
Warnings about unstable placement, liquids, and flames.
Instructions and warnings regarding the AC power cord.
Advice to refer servicing to qualified service personnel only.
Features for master effects, presets, and send control.
Controls for monitor bus level and headphone amplifier.
Button for configuring stereo or mono amplifier operation.
Details on the 800-watt stereo power amplifier.
Protection features and speaker output connector types.
How to use the phantom power button and LED indicator.
Guidance on adjusting the gain control for optimal signal.
Explanation of the monitor send control's signal path.
How the EFX send control routes signal to the master EFX bus.
How to use the cue button for headphone preview.
Indicates when a channel's signal is approaching clipping.
Regulates the overall level of the monitor bus.
Main master faders determine output signal levels.
Directs main signals to EQ and amplifier channels.
Details on graphic EQ functionality and feedback control.
How to set the master EFX send level.
Information on the 16-bit DSP effects subsystem.
Details on the built-in amplifier's power and cooling.
Critical warning about blocking air vents to prevent overheating.
Protection against open/shorted loads and thermal shutdown.
Adjusting controls during a sound check for proper levels.
Procedures for identifying and resolving monitor feedback.
Advice on setting volume levels to avoid feedback.
Emphasizing the use of earplugs to prevent hearing fatigue.
Output power at various loads and THD.