Need help?Do you have a question about the YORKVILLE NX200S and is the answer not in the manual?
General| Active or Passive | Active |
|---|---|
| Enclosure Material | MDF |
| Type | Powered Subwoofer |
| Power Handling | 200W RMS |
| Max SPL | 121 dB |
| Frequency Response | 45Hz - 150Hz |
| Inputs | XLR, 1/4 inch |
| Outputs | XLR |
| Driver Size | 12-inch |
Follow all instructions, read manual, use dry cloth, keep packaging, avoid rain/moisture/water.
Connect to specified voltage, use polarized plug correctly, avoid defeating grounding.
Avoid unstable surfaces, use manufacturer-recommended accessories, avoid liquid placement.
Do not defeat plug safety features, check cord for damage, unplug during storms or long periods.
Unit should only be serviced by qualified personnel.
On/Off switch for the unit.
Adjusts subwoofer output level; 0 dB is baseline for full power.
Selects between Speaker or Line level input signals.
Helps eliminate hum by isolating ground connection.
Balanced 1/4-inch parallel jacks for connecting audio sources.
Indicates when the unit is powered on.
Illustrates series connection via parallel input jacks for multiple units.
Connect like ordinary speakers, set input level to speaker, manage ground lift, no external crossover needed.
200 Watts amplifier, 50 Hz-110 Hz response, 80 kohms input impedance, 10-inch 2-ohm speaker.
Balanced 1/4-inch inputs, grounding via 10-ohm protection device.
Max SPL 125 dB, limiting features, power requirements (110/230VAC).
Weight 54 lb (24.5 kg), dimensions 17.5x27x14 inches.
Transferable warranty for two years, ten years for enclosure, excludes specific items and damage types.
To Next Page
