YORKVILLE Synergy SA115S Service Manual

SERVICE MANUAL
Synergy SA115S
SMT Disclaimer
Due to the complex nature of the use of SMT installed components
in Yorkville equipment, we highly caution all service technicians in
attempting to repair or replace SMT factory installed components.
Many of these components may be glued prior to initial soldering.
Replacing SMT components requires expensive
specialized de-soldering equipment and training.
Yorkville Sound will repair and replace defective SMT components
to ensure proper quality assurance and installation is maintained.
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305, USA
Voice: 716-297-2920
Fax: 716-297-3689
WORLD HEADQUARTERS
CANADA
Yorkville Sound Limited
550 Granite Court
Pickering, Ontario
L1W 3Y8 CANADA
Voice: 905-837-8481
Fax: 905-837-8746
SA115S
Manual-Service-SA115S-00-1v0 • May 20, 2021

YORKVILLE Synergy SA115S Specifications

General

System Type	Active Subwoofer
Active or Passive	Active
LF Driver(s) Impedance (Ohms)	8
Inputs	2
Outputs	2
Enclosure Materials	15mm Birch Plywood
LF Driver(s)	15-inch
Input Connectors	XLR
Output Connectors	XLR
Input Impedance (Ohms)	20k Ohms
Input Sensitivity (Vrms Sine)	1.4V
Mixer Controls	Level, Low Pass Filter
Other Controls / Indicators	Power
Grille	Steel
Height	58.4 cm
Width	48.3 cm
Depth	61 cm