Youin Rio - Pre-Ride Safety Checks; Regular Maintenance Checks; Operation; Display Screen Overview

7
ENGLISH
Battery charge
ON/OFF button
Speedometer (Km/h)
PAS - Pedal Assist Level
DOWN button
UP button
ODO - Accumulated mileage
TRIP - Trip Mileage
Security
Operation
Before each use
Before each ride, you should check that the brakes are secure and working properly.
The handlebar and seat post must be in the correct position and firmly fixed. The
wheels must have enough pressure and all the nuts and bolts must be well tightened.
The battery must have sucient charge for the use that we are going to give it.
Regular checkups (every 1-2 months)
These controls guarantee the perfect condition of the e-bike and optimal operation.
1- Check that the welds on the frame and fork are in good condition and show no signs
of corrosion.
2- Check that the front and rear brakes are attached to the chassis and brake
eectively.
3- Check tire pressure and tread depth.
4- Check that the rims are well secured and do not have any loose or broken spokes.
5- Check that the handlebar and the seat post are well inserted and firmly tightened.
6- Check that the cables are suciently greased and that they have no obstacles in
their path.
7- Check that the battery is charged enough.
Screen
System on/o
Press and hold
for a few seconds to turn on your Youin Rio. Long press again to
turn it o.