Need help?Do you have a question about the Youjie 3300 and is the answer not in the manual?
General| Scan Pattern | Single-line |
|---|---|
| Interfaces Supported | USB, RS232 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% (non-condensing) |
| Power Supply | 5V DC |
| Decode Capability | 1D barcodes |
Connect the scanner via USB or Keyboard Wedge interfaces following power-off procedures.
Guidance on proper techniques for reading barcodes, indicating correct and incorrect methods.
Scan barcode to reset all standard product default settings to factory configuration.
Barcodes for selecting USB or Keyboard Wedge emulation modes for the scanner.
Configure 2 or 5 digit barcode supplements, including 977 (2 Digit) Supplement Required.
Configure scanner modes like Automatic Scanning, Continuous Blinky Scan, and Manual Trigger.
Configure UPC-A number system transmission and UPC-E to 12-digit expansion.
Configure Code 39 Full ASCII mode for character pair interpretation.
Specify minimum character count for non-UPC/EAN barcodes.
Enforce exact character count for non-UPC/EAN barcodes.
Contact information for technical support, product service, and repair.
Details of Youjie's product warranty, coverage, and limitations.
Further details on warranty exclusions, remedies, and transferability.
Information on accessing localized versions and downloading the User's Guide.
Notice regarding Youjie's right to change specifications and liability.
Information on product agency compliance and testing standards.
Safety precautions and warnings regarding laser operation and exposure.
To Next Page
