Barcode General Setting
1.Working Mode
Normal Mode：(*)
Scan barcodes directly then the decoded data transfer to the receiver
and displayed on your devices. But if the transmission fails (for example,
over the transmission distance or the receiver is not opened), then "di，
di，di " sound prompts transmission failure.
Normal Mode
Inventory Mode
Inventory mode allows you to use the scanner without setting up any
connection (wired or wireless). Then it has a large working area to cover
or outside the coverage range.
Inventory Mode
Now you can start scanning barcodes. Scanned barcode will be stored in
the built-in memory until it is cleared. At the end of your work, you can
scan the “Transfer data” then transfer data to your PC or other hosts.
To Next Page
Loading...