Using the white aerial cable supplied
• Connect one end of the white aerial cable into your
aerial wall socket.
• Connect the other end into the socket on your
YouView box where it says ANTENNA IN.
3. Connect the aerial to your YouView box
using your existing aerial cable
• Remove your existing aerial from your TV and
connect it into the socket on your YouView box where
it says ANTENNA IN.
OR
You’ll need an aerial to bring your Freeview channels into your YouView box.
6
Connect the box and cables WITHOUT Powerline Adapters
YouView box
White aerial cable
If you are using Powerline Adapters go straight to page 8
To Next Page
Loading...
