11
OUTPUT DC VOLTAGE& TEMPERATURE PROTECTION
AELIUS is equipped with an electronic circuit that will mute the amplifier in case of DC
occurring in the output. This is to protect the speakers from possible damage.
If this occurs contact your dealer or the factory.
There are 3 fuses in this amplifier. One in the mains and two for the DC protection.
These are 6,3 A slow blow fuses.
Note that in the input stage there should be no DC voltage occurring in any case. This
could cause the damage of the input valve.
If for some reason the temperature of this amplifier passes 90° C the output relay
switches off and only reopens when the device reaches 40° C.
To Next Page
Loading...
Need help?
General
