5
CONNECTING TO THE MAINS OUTLET
Your amplifier has a description of the appropriate operation voltage on its back panel.
Please make sure not to overlook the specifications. In case you need to operate it in a
region with no complying voltage, contact your dealer or the factory. The power cable
that you will use must be at least 3 x 1.5 square mm and grounded to the mains outlet.
This device is Class I and the following safety rules apply:
According to guide 73/23/EEC for low voltage and guide 89/336/EEC (EMC) this
device is marked with
.
To Next Page
Loading...
