.Register Account2
)Wechet Registration(1
① Start App and select the login mode.
② Enter your account information of wechet
③ Click OK
)(2 E-mail Registration
① Click E-mail
Click the "Register"②
③ Enter the registered email password and click Register,
and into the mailbox activated
(3)Mobile Register
Click mobile landing
①
Sign Up ②
Enter the account password and then enter verification code ③
and click Register.
(3)Add Device
① Plug the power cord
② Insert wait 20 seconds, then insert the reset pin
③ Hear "beep" sound, while the yellow light flashes
④ Confirm flashing yellow light, or re operation of the second unit
⑤ Enter WIFI information
⑥ Ready to sweep the two-dimensional code / or select sonic Con-
figuration(Try try several times when not connected)
⑦ Use IPC scan two-dimensional code, the distance between 10-20
cm. Wait adding results. Webcam added successfully (Chinese
voice: Scan successful, click Next; LED: flashing yellow light).
After the IPC on the line: Chinese voice: camera head the line;
LED: blue light.
⑧ Click to add cameras to watch online.
(4)Features
① Click to add cameras to watch online
② Click on the appropriate button to voice intercom / scr-
een shots / Mobile Video / smooth, clear switch / a key full-
screen function
Assembly and Use
To Next Page
Loading...