yte S7 - Charge Your Vacuum; Cleaning

08
Before use, make sure that the vacuum is fully charged and the dust box and filters are cleaned, dried, and
fixed in place.
Notes:
• The vacuum cannot work while charging.
• The power indicator(s) is(are) flashing during charging, and stay white when fully charged.
• The power indicators flash when the battery is low.
• The vacuum cannot be charged when the ambient temperature is below 10℃/50°F or above 45℃/113°F.
The vacuum is powered by the built-in lithium battery. Before first use, charge the battery for at least 3.5 hours.
CAUTION
Do not use the vacuum to clean up water.
Charge Your Vacuum
Cleaning
Method 1
Method 2
POWER
On/Off
Suction strength
indicator
Medium suction strength (Green)
High suction strength (Blue)
POWER
X2
X1