yte S7 - Troubleshooting; Specifications

11
10
11
Install the sponge filter on the HEPA filter
and turn the HEPA filter counter-clockwise
to install it in the metal filter.
Turn the metal filter counter-clock-
wise to install it in the main unit.
Make sure that the grooves on the dust
box are aligned with the buckles on the
main unit, and then push the dust box
upward into the main unit.
12
Turn the dust box counter-clockwise
until you hear a click.
13
1
Turn off the vacuum, press the floor brush
release button to remove the floor brush
from the metal tube.
2
Press the rolling brush release
button to release the rolling brush
locking strip.
Clean the Rolling Brush
Click