UH-02-Aug16-ENG P 7 / 21
B - Basic HR System
The system is provided with the major components, manifold, nozzles, cylinders, etc., separately.
The specific composition of each system is in accordance with the project drawing approved by the client.
C - Pre Wired (PW) Eco Modu System
The system comes pre-assembled (prewired), with rails, plugs, connections and raccords.
The specific composition of each system is in accordance with the project drawing approved by the client.
D - Hot Half Modu System
This integrated system is provided in the dimensions of the mold plates. In these cases the injection
system is provided already assembled inside the plates which form the mold structure in the same fixed
part. It does not include cavity plates or any other mold structure.
To Next Page