UH-02-Aug16-ENG P 8 / 21
In any case the system has sensitive components which require extra care:
- Electrical components - resistances, thermocouples, electrical coils
- Tips and torpedoes with high thermal conductivity, but low mechanical strength.
- Seals and gaskets susceptible to blows, cuts, or crushing.
Identify the type of construction applicable to your system. For each type of construction there are specific
instructions,
Module A - Single Nozzle Type
Module B – Basic HR System Type
Module C1 – Pre Wired (PW) Eco Modu – Sliding Nozzles Type
Module C2 – Pre Wired (PW) Eco Modu – Threaded Nozzles Type
Module D – Hot Half Modu System Type
To Next Page