EasyManua.ls Logo

YUNEEC Breeze 4k - Physical Setup Procedures; Unfolding the Landing Gear; Installing the Propeller Protectors

YUNEEC Breeze 4k
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To remove the propeller protectors, unlock them from
the engine arm from one side to another.
Battery Warnings:
To charge the flight battery, you must use
only the included charger.
Do not over-discharge the LiPo battery.
If at any time the LiPo battery begins to balloon or
swell,discontinue charging or discharging immediately.
Always terminate all processes if the battery,
charger or power supply malfunction.
Store the LiPo battery at room temperature and in a
dry area for best results.
3. UNFOLDING THE LANDING GEAR
Unfold the four landing gears as shown in the below
illustration.
4. INSTALLING THE PROPELLER PROTECTORS
NOTICE: FAMILIARIZE YOURSELF WITH EACH TASK
MODE BY READING THE TUTORIALS ON THE BREEZE
CAM APP BEFORE OPERATING BREEZE.
Install the four propeller protectors to the correspond-
ing positions as shown in the illustration below.

Related product manuals