Need help?Do you have a question about the YUNEEC E- GO and is the answer not in the manual?
General| Max Speed | 20 km/h |
|---|---|
| Range | 30 km |
| Motor Power | 400 W |
| Battery Type | Lithium-ion |
| Battery Voltage | 36V |
| Charging Time | 3-5 hours |
| Max Load | 100 kg |
| Weight | 6.3 kg |
| Tire Size | 8 inch |
Describes the E-GO's 13mm, eight-layered composite wood deck with griptape.
Details the sleek, low profile multi-cell battery pack located under the deck.
Details the slow (13 km/h) and fast (20 km/h) speed modes available.
Explains the ECO mode for range and SPORT mode for acceleration.
States the E-GO can handle inclines up to 10%, with potential ECU shutdown.
Specifies charge time for the board (3-5 hours) and controller (50 mins).
Explains the Regenerative Braking System (RBS) that recycles power.
Highlights the E-GO's lightweight design (6.3 kg) for portability.
Details max user weight, range, and speed limits.
Lists charger input, output, and indicator status.
Details deck material, dimensions, wheel size, battery, motor, and weight.
Lists controller material, dimensions, weight, battery, and connection type.
Advises reading all tips and instructions to reduce risks.
Recommends starting in low speed mode and practicing in safe zones.
Specifies age, weight limits, health, and mental alertness requirements.
Provides checks for board activation, controller power, and synchronization.
Advises checking speed mode settings and battery status for slow movement.
Illustrates and labels the screws used for the deck.
Illustrates the drive wheel and belt components, with a caution.
Details the process for installing the front truck set.
Details the process for installing the rear truck set with the motor.
Guides on how to install the Electronic Control Unit (ECU).
Steps for unscrewing, removing, and replacing the motor cover.
Instructions for replacing the drive belt and related components.
Steps for replacing bushings on the truck's kingpin.
Guides on replacing bearings in the wheels.
Steps for replacing the wheel set with pre-installed bearings.
Instructions for installing a replacement battery pack.
To Next Page
