Yupiteru MVT-7100 User Manual

UPITERU
MVT-7100
Wi I a nd Hand Held Receiver
Operating Instructions

Yupiteru MVT-7100 Specifications

Frequency and Modes

frequency coverage	530 KHz to 1650 KHz
receiving modes	Wide FM, Narrow FM, AM, Lower Side Band, Upper Side Band
tuning steps	Wide FM: 50 KHz & 100 KHz, Narrow FM: 1 KHz, 5 KHz, 6.25 KHz, 9 KHz, 10 KHz, 12.5 KHz, 20 KHz, 25 KHz, 50 KHz, 100 KHz

Sensitivity

sensitivity AM 0.53 MHz - 2 MHz	10 µV (S/N 10 dB)
sensitivity AM 20 MHz - 30 MHz	10 µV (S/N 10 dB)
sensitivity USB/LSB	10 µV (S/N 10 dB)
sensitivity FM	15 µV (SINAD 12 dB)
sensitivity AM 30 MHz - 1000 MHz	0.5 µV (S/N 10 dB)
sensitivity USB/LSB 0.5 µV	(S/N 10 dB)
sensitivity FM 0.5 µV	(SINAD 12 dB)
sensitivity WFM 0.75 µV	(SINAD 12 dB)
sensitivity FM 1000 MHz - 1300 MHz	10 µV (SINAD 12 dB)

Memory and Speed

memory channels	1000 (in 10 banks of 100)
search banks	10
priority channels	1
scan speed	30 channels per second (approx)
search speed	30 increments per second (approx)

Power

power requirements internal	4.8 V (4 x AA nicads)
power requirements external	12 V DC (200 mA)
audio output	100 mW (8 ohm)
current consumption	140 mA
standby current	100 mA
save current	10 mA

Weight and Dimensions

dimensions	64.4 (w) x 155 (h) x 38.2 (d) mm
weight	320 g

Summary

YUPITERU MVT-7100 Wide Band Hand Held Receiver Operating Instructions

GENERAL DESCRIPTION

SUPPLIED ACCESSORIES

CONTROLS

LCD DISPLAY

KEYPAD CONTROLS

PRIMARY KEY FUNCTIONS

Detailed explanations of the primary functions of the keypad keys.

YUPITERU MVT-7100 OPERATION

MANUAL MODE OPERATION

Explains how to operate the receiver in manual mode.

ENTERING FREQUENCIES

ROTARY TUNING/MANUAL TUNING

CORRECTING A WRONG ENTRY

CORRECTING OR ADJUSTING THE MHz DIGIT(S) AFTER ENTRY

STORING FREQUENCIES IN MEMORY CHANNELS FROM MANUAL MODE

MEMORY STORAGE - CONSECUTIVE CHANNELS

RECALLING A MEMORY CHANNEL

TRANSFERRING A FREQUENCY FROM A MEMORY CHANNEL TO MANUAL MODE

Moving stored frequencies back to manual mode for tuning.

CLEARING A MEMORY CHANNEL

Process for deleting stored frequencies from memory.

PRIORITY MEMORY CHANNEL - FREQUENCY STORING

Storing a frequency as a priority channel for monitoring.

TO MONITOR PRIORITY MEMORY CHANNEL

TO CHECK THE CONTENTS OF PRIORITY CHANNEL

MEMORY SCANNING

TO STOP SCANNING

SELECTIVE MEMORY BANK SCANNING

MEMORY CHANNEL PASS (LOCKOUT)

PROGRAM SCAN

REMOVING CHANNELS FROM PROGRAM SCAN

Deleting channels from a programmed scan list.

MODE SCAN

SEARCHING

PROGRAMMING NEW SEARCH BAND LIMITS

STORING FREQUENCIES IN MEMORY FROM SEARCH

SEARCH PASS MEMORY

CHECKING CONTENTS OF THE SEARCH PASS MEMORY

REMOVING FREQUENCIES FROM SEARCH PASS MEMORY

FUNCTIONAL CONTROLS AND FEATURES

ATTENUATOR

Reduces signal strength to prevent interference from strong signals.

DELAY

Adjusts the pause time after a transmission before resuming scan/search.

SKIP

Continues scanning/searching after a short pause, even if transmission is ongoing.

BEEP

Controls the audible confirmation sound for key presses.

BATTERY SAVE

MVT-7100 TECHNICAL SPECIFICATIONS