Volume of liquid added should be 0.5 mL at least and 8 mL at
most.
Choose liquid type, dose and using method according to
doctor’s instruction.
Tighten cover of medication cup after injecting liquid, so as to
avoid liquid leakage.
Do not shake nebulizer violently or carry nebulizer with liquid or
other fluid in medication cup.
Follow doctor’s instructions in case of using high-concentra-
tion and high-viscosity suspending and volatile liquid.
Confirm medication cup module
is well mounted (it will be buckled
after slight “clatter” sound is
given off); ensure electrode is
excellently connected, so as to
spray normally.
Ensure cleanness of main unit
and medication cup; if not,
nebulizer may not work well.
Push
Attention
Attention
08 09
Press
PUSH key
Push forwards
ml
3. Inject liquid into medication cup.
Open cup cover and inject liquid into medication cup according to the
figure; after that, tighten cover.
4. Put medication cup module back in nebulizer and
confirm the installation is excellent.
To Next Page
Loading...
