To Next PageTo Next Page
Need help?Do you have a question about the YX MOIP 32-512 and is the answer not in the manual?
Specifies the default IP addresses for the MOIP Gateway's WAN and LAN ports.
Provides step-by-step instructions for physically connecting the MOIP Gateway.
Guides users on how to access and log into the MOIP Gateway's web interface.
Displays live SIM status, port details, call duration, and signal strength information.
Details the specific columns and their meanings within the Call Status display.
Provides analysis of call statistics like total calls, connected calls, and failures.
Configures VPN settings and network management ports for the gateway.
Configures SIP-related features like forbidding GSM calls and auto-answer.
Manages USSD commands, including manual and automatic queries for SIM cards.
Sets hardware properties for each port, including SIM binding and volume controls.
Sets IMEI prefixes and conditions for automatic IMEI switching.
Allows manual input of IMEI for each SIM card slot.
Configures dynamic IMEI assignment for ports using a range of IMEIs.
Sets up dial prefix manipulation rules for GSM to IP and IP to GSM translations.
Configures PIN unblock settings for SIM cards.
Enables and configures the MOIP billing server for outbound calls.
Defines keywords for USSD/SMS balance and SIM status queries.
Sets billing tariffs based on destination prefixes and call duration.
Configures automatic USSD sending based on duration or schedule.
Displays current USSD commands, responses, and allows sending USSD.
Configures scheduled SMS sending based on content, recipients, and timing.
Sets up checks for SIM online time to manage usage and prevent blocking.
Configures checks based on the total number of SMS sent.
Sets up checks based on the cumulative number of failed SMS.
General