Need help?Do you have a question about the YZAKI SKIPPER and is the answer not in the manual?
Safe charging practices including position, using original charger, switching off cleaner, and dry charging port.
Guidelines for working temperature, charging before depletion, avoiding overcharging, and battery maintenance during storage.
How to use the switch button for power and Bluetooth, and understanding the LED indicator states.
Steps for charging the cleaner, including prep and interpreting the charger's indicator lights.
Detailed steps for accessing, cleaning, and correctly re-installing the filter basket.
Guide to downloading the WYRobot app and granting necessary Bluetooth and location permissions.
Steps to connect the cleaner via the app, set up pool details, modify parameters, and reset.
General| Rated input voltage of charger | 100VAC-240VAC |
|---|---|
| Rated input frequency of charger | 47-63 Hz |
| Power | 65W |
| Capacity | 8.8AH |
| Flow rate | max. 10m³/h (appr. 2642gal/h) |
| Running speed | max. 11m/min (appr. 36ft/min) |
| Max. charging voltage | 12.6VAC |
| Charging current | 1.8A |
| Running time | max. 90min |
| Charging time | 7-8H |
| Filter density | 180μm |
| IP Grade | IPX8 |
| Max. water depth | 2m (appr. 6.6ft) |
| Working (water)temperature | 10℃- 35℃ |
| Charging temperature | 5℃- 35℃ |
Weight and Dimensions| Weight | 8kg |
|---|
To Next Page