17
1. Brief Introduction
The robotic pool cleaner SKIPPER is a new type of highly efficient and energy-saving
swimming pool cleaning robot. It cleans the pool walls and bottom automatically without
replacing the pool water. It is totally environmental-friendly.
For safe operation, the cleaner is powered by a rechargeable lithium battery (12.6V,
8.8Ah).
2. Security
2.1. Charging position, refer to important precaution 4.
2.2 Use only original charger, do not use this charge for any other battery products.
2.3 Switch off the cleaner before charging.
2.4 Do not switch on the cleaner while charging.
2.5 Working temperature: 10℃-35℃
2.6 Charge the cleaner before battery is exhausted. Stop the cleaner and charge it when
power is decreased.
2.7 Do not over charge the cleaner which will reduce the battery life.
2.8 Charging temperature :5℃ to 35℃. Cool the cleaner before charge if it is too hot.
2.9 every 3 months if it needs to be stored for a long time.
2.10 Make sure the charging port is dry befor charging.
To Next Page
Loading...