Z Automotive Tazer JL Mini User Manual

1
User’s Guide
For Firmware 11.2.1-042320
Contents
Feature List 2
• Vehicle Settings 2
• Live Functions 3
Installation 4
Vehicle Settings 5
• Submenu Performance 6
• Submenu Tire 7
• Submenu Radio 7
• Submenu Lighting 7
• Submenu Other 8
Live Menu Settings 10
Non-Menu Live Functions 11
Conguration 13
The Unmarry Key 13
Troubleshooting 14
The Tazer JL Mini is an electronic plug-in
device for the following vehicles:
2018-2020 Jeep Wrangler JL
2020 Jeep Gladiator JT
Firmware Updates
New rmware
is available
periodically,
always free
and posted
to the Z
Automotive
website.
The Tazer may not ship with the latest
rmware, so use ZPU (Z Automotive
Programming Utility), also on the website,
to install the rmware over USB.
Also compatible with
Jeep Gladiator JT

Z Automotive Tazer JL Mini Specifications

General

Read Diagnostic Trouble Codes (DTCs)	Yes
Clear Diagnostic Trouble Codes (DTCs)	Yes
Compatibility	Jeep Wrangler JL (2018+) and Gladiator JT (2020+)
Features	tire size adjustment, axle locker control
User Interface	Steering wheel controls and menu system
Installation	Plugs into the vehicle's OBDII port.
Firmware Updates	Yes, via USB
Axle Locker Control	Yes
Warranty	1-year limited warranty
Functionality	Provides access to numerous vehicle settings and features that are otherwise inaccessible. Enables performance modifications, tire size adjustments, gear ratio changes, and various lighting and electronic customizations.