Z-CAM Z CAM E2C - Page 18

(South Korea，Philippines，Ta i w a n o f China), And 50Hz for China mainland, other
countries and regions.
• EV: -3.0 ~ 3.0
• Shutter Speed / Shutter Angle: This setting depends on whether “Shutter Speed” or
“Shutter Angle” is selected in 2.5 Exposure - Shutter Operation
Shutter Speed: Auto / Manual（1” ~1/8000”）
Shutter Angle: Auto / Manual（1°~ 360°）
* The minimum shutter speed “1” is available only when" variable frame rate "is set to
“1”.
• Aperture: It shows the range of aperture of the lens, and can be adjusted manually if
it’s an electrical lens. Only for lenses with electronic contacts. If the lens used is a
purely mechanical without electronic contacts, the aperture value is not shown here.
• ISO: Auto or Manual (800 ~ 25600)
• Minimum ISO: 800 ~ 3200
• Max ISO: 1600 ~ 25600
• Max Shutter Speed / Max Shutter Angle: This setting will be activated if Shutter
Speed / Shutter Angle is in Auto mode.
Max Shutter Speed: Auto / Manual (1” ~ 1/1600”)
Max Shutter Angle: Auto / Manual (1°~ 360°)
• Metering Mode: Center / Average / Spot, it sets the metering mode of exposure.
• Shutter Operation: Speed / Angle
• AE Speed: Slow / Normal / Fast
• Lock In Record: Off / On. Enable this function, it will automatically lock the exposure
during recording.