Z-CAM Z CAM E2C - 5. Connect to the Camera; 5.1. Wi-Fi Connection

4) PC will detect the camera and shows it as external storage device. You can access &
manage the files in the SD card inside the camera.
5. Connect to the Camera
5.1. Wi-Fi Connection
You can connect the camera to an external iOS device (iPhone / iPad) or a computer (PC
/ Mac) through Wi-Fi with following steps:
1. Install a Wi-Fi antenna to the Wi-Fi Antenna Port of the camera.
2. In Connect –Network setting menu, set the Wi-Fi to “On”，go back to Network
setting, there will show the Wi-Fi ID: ZCAM-E2C-XXXX (last 4 digits match to camera
ID) on the Wi-Fi item.
3. Press MENU to go back to Standby screen, there will be a Wi-Fi icon on top of the
screen.