Z-CAM Z CAM E2C - Page 25

line.
n Center Mark: Enable / Color
- Enable: On / Off, when setting “Enable”, there display cross mark on the
center of HDMI output screen.
- Color: Red, Green, Blue, Orange and White, can choose the color of center
mark.
n Grid Line: On / Off, to turn on / off the grid line on HDMI output.
n Safe Area: On / Off, to turn on / off the safe area frame line on HDMI output.
• Load LUT: None / Rec709 / V709 / LC709A / zRGB_AR / zRGB_AX2 / sRGB /
sCINE_709 / Rec2020 / HLG / P3D60 / P3D65 / P3DCI / F709 / Import
Note:
1. Imp o rt: To import LUT from CFast card, the LUT file should be saved in
“MISC/Looks/preview” folder of the storage.
2. Only support x33 cube format for HDMI output.
3. LUT is available for playback mode
• Desqueeze Display: H 1x / H 1.33x / H 1.5x / H 1.8x / H 2x / V 1x / V 1.33x / V 1.5x
/ V 1.8x / V 2x. When the camera is using an anamorphic lens, it’s to set the de-
squeeze ratio as to horizontally or vertically resize the image correctly.
• User Profile： Save Profile / Load Profile / Save To Card / Load From Card
n Save Profile: Export current Fn configuration to a file and save it in the memory
of the camera.
n Load Profile: Select the saved configuration in the camera, import and apply it
to the camera settings.
n Save To Card: Export the current camera settings as a configuration file and
save in the camera card (save in /MISC/profile/ directory, file name suffix.prf)
n Load From Card: Import the configuration file from the CFast card of camera,
and apply it to the camera settings.
Note: Configuration files saved on a memory card can be renamed, but only
in English letters.
• User Button: Users can set the function for all the other keys (including FN /F1 / F2
/ F3 / POWER / UP / DOWN / OK) on the camera except MENU. It can be defined as
shortcut setting functions., which includes as below: