Z-CAM Z CAM E2C - 1.7. Storage

• Camera Battery: The battery socket is compatible with Canon LP-E6 battery. (Battery
not included in the package)
• V Mount Battery: Connect the camera to a V mount battery (with D-TAP port) with the
D-TAP power cable (D-TAP plug).
• Power Over Ethernet (POE): Connect the camera to a switcher / router supports POE
(compatible with 802.3af / 802.3at standard) with an Ethernet cable (Super CAT 5 or
above, less then 100m length) , then the camera can be powered by the switcher /
router.
1.7. Storage
The camera uses SD card or SSD as storage.