Need help?Do you have a question about the Z-Com XG-300 and is the answer not in the manual?
General| Brand | Z-Com |
|---|---|
| Model | XG-300 |
| Category | Network Card |
| Language | English |
Insert the Cardbus card into the notebook's Cardbus slot after turning the PC off.
Install drivers when prompted by Windows after hardware detection.
Follow instructions strictly; unauthorized modifications void authority and may cause interference.
Product has no user-serviceable parts and requires approved antennas; modifications invalidate certifications.
Maintain at least 1 inch (2.5 cm) distance from the antenna during use to comply with RF exposure limits.
Device complies with FCC Part 15, subject to no harmful interference and acceptance of received interference.
Tested and compliant Class B device; may cause interference if not used per instructions; user must correct interference.
Product's encryption code may not be exported from the US or Canada without an approved license.
Device complies with R&TTE Directive 1999/5/EC, meeting essential requirements for safety and EMC.
To Next Page